• How Can I Tell How Efficient My Furnace Is?

    Your furnace demands a major share of your home’s energy, so it’s important to ensure that it is running as efficiently as possible. If you haven’t evaluated your furnace in some time, you could be overpaying for heating and using more energy than you have to. These tips will help you determine how efficient your furnace really is.

    Check Your AFUE Ratings

    AFUE stands for Annual Fuel Utilization Efficiency. This rating gives you an idea of how much energy your furnace requires to produce a specific amount of heat. By checking your AFUE rating, you can learn a lot about the efficiency of your system. If you have an AFUE rating of 85%, for example, 85% of the energy used by your furnace creates heating, while 15% of it is lost through inefficiency. Keep in mind that AFUE doesn’t tell the whole picture about energy loss, but it does give you a good starting point to consider aspects of efficiency.

    Find Out When Your Last Furnace Maintenance Service Was

    Furnace maintenance is something that frequently falls by the wayside, but ignoring maintenance needs allows your furnace’s efficiency to dip. Check your records to find out when your last maintenance appointment was. If it wasn’t in the last year, there is a good chance that your furnace is not operating efficiently. Schedule a maintenance appointment and consider enrolling in a furnace maintenance plan so that you don’t fall behind again.

    Review Your Energy Bills

    Rising energy bills are a clear indicator of a change in efficiency. Sometimes, a spike is obvious, but in other cases, your energy costs may slowly rise in a way that you don’t even notice. Review your bills over the past several months to see if there is a steady increase. If so, your furnace could be to blame.

    Albert Nahman Plumbing and Heating offers a range of furnace service, from furnace repairs and maintenance to replacement. For furnace service in Berkeley , call us today at (510) 843-6904.

  • Cutting Costs with Your Water Heater

    Your water heater is responsible for an enormous share of your home energy costs. In this video, you can learn how to adjust the way your water heater works so you can save money on your power bills.

    Water heaters are usually set at around 120 degrees Fahrenheit, which may be warmer than you need, especially in the summer months. By adjusting that temperature downward, you can reduce your energy use while still having an adequate supply of hot water.

    At Albert Nahman Plumbing and Heating , we are committed to helping homeowners have the most efficient plumbing systems and appliances in their homes. For everything from water heater repairs to tankless water heaters in Berkeley, call our plumbers at (510) 843-6904.

  • How Often Should Furnace Filters Be Changed?

    Changing your furnace filters is important for preserving indoor air quality and ensuring the efficiency of your heating. When you don’t change your filters regularly, they will fail to adequately trap dust and air particles, allowing them to enter your home and the air you and your family breathes. A clogged filter will also make your furnace have to work harder to heat your home, leading to higher energy costs. Changing your filter should become part of your regular home maintenance routine.

    How often your filter needs changed depends on a number of factors, including the size of the filter, whether you have pets or have smokers in your house, and whether you have a habit of keeping your windows open. Generally, a filter that is one to two inches can be changed every three months, while four-inch filters can be changed every six months, and five-inch filters can be changed every 12 months. However, if you have pets, smoke, or keep your windows open, you may need to change your filters as often as once per month.

    If you have any questions about getting the most from your furnace and improving your indoor air quality in Berkeley , contact Albert Nahman Plumbing & Heating for advice. Dial (510) 843-6904 to speak to one of our pros.

  • Spotlight on Sewer Line Problems

    Homeowners typically dread the idea of having to have repairs done on their sewer lines. Replacing or repairing sewer lines has traditionally been disruptive and extremely expensive—but fortunately, it doesn’t have to be that way, thanks to trenchless sewer line repair services . The trick is acting quickly if you suspect there is an issue with your sewer line, so that your plumber can make repairs before the issue gets worse. Here is what you need to know about sewer line problems, including your options for repairs.

    What causes sewer line problems?

    Sewer line problems occur when something obstructs the flow of water and waste through the line. In some cases, a tree root grows into the line, either breaking it completely or causing the line to become compressed. Build-up along the line can also cause blockages or decreased water flow. Ground that has been improperly backfilled or heavy rocks on top of the lines can also damage the pipes.

    What are the signs of a sewer line problem?

    If there is a problem with your sewer line, one of the first signs you may notice is an odor coming from your drains. There may be a decrease in water flow, or water may bubble out of drains when you flush your toilet. Multiple drains clogging at the same time also indicates a problem with a sewer line. Water or waste may appear on your lawn, or the ground may develop indentations. When a sewer line problem occurs, many homeowners also notice that their water bills jump.

    How are sewer line problems repaired?

    Sewer line repairs used to mean digging up your yard to expose the line so that your plumber could access it. Now, trenchless repair is possible. Through this kind of repair, your plumber uses camera equipment inserted into the line through a small opening to locate the problem. Many repairs, such as hydro-jetting and pipe sealing, can also be done through a small access point.

    Don’t let sewer line issues progress without calling your plumber . Albert Nahman Plumbing & Heating is pleased to offer trenchless sewer repair in Berkeley to give you the service you need without the expensive of extensive digging. To learn more, please call (510) 843-6904.