• How to Fix a Troublesome Toilet Flapper

    If your toilet runs constantly, or you notice occasional “phantom flushes” when no one is even near the toilet, the flapper is most likely to blame. This is the small rubber device at the bottom of the tank that opens when you flush the toilet and closes again to allow the tank to refill. Fortunately, you can fix or replace a finicky flapper without difficulty. 

    Before you get started, turn the valve behind the toilet to stem the flow of water as you work. Then, follow these tips to fix a troublesome toilet flapper. 

    Adjust the Chain 

    Lift the lid off the tank, and take a look inside. You’ll see a thin metal or plastic chain connecting the rubber flapper to the handle arm. This is what lifts the flapper when you flush the toilet. Assess the length of the chain. It should be long enough that the flapper sits properly over the opening but short enough that it doesn’t get caught under the flapper as it closes. Shorten or lengthen the chain by a link or two, and see if that fixes the problem. 

    Clean the Flapper 

    Old flappers can collect gunk around the rim, preventing them from closing tightly. A slow leak can lead to phantom flushes and water waste. With the valve behind the toilet turned off, press the handle to empty the tank. Then, gently lift the flapper off its seat and wipe it clean. For stubborn mineral buildup, try a scouring pad or old toothbrush. Finally, close the flapper, turn the water back on, and see if the flapper sits tightly now. 

    Replace the Toilet Flapper 

    If adjusting the chain and cleaning the flapper doesn’t work, try replacing it. Toilet flappers are inexpensive and available at your local hardware store. It’s wise to bring the old flapper with you to make sure you purchase a compatible replacement.  

    Simply unsnap the two arms from the posts holding the flapper in place. Then, unhook the chain from the top of it. Attach the new flapper to the same link on the chain and insert the arms onto the posts. While you’re at it, wipe down the interior of the toilet tank with a rag to remove mold and mineral buildup. 

    With the new flapper firmly in place, turn the water back on. The tank should fill to the proper level automatically. Once it stops, test your installation by flushing the toiletHopefully, your days of dealing with a troublesome flapper are now behind you! 

    While it’s easy enough to troubleshoot and replace a toilet flapper, this is far from the only thing that can go wrong with your commode. Count on Albert Nahman Plumbing & Heating the next time you need toilet repair or replacement in Berkeley. We offer fair prices and guarantee our work with nearly four decades of experience to back us up. Contact us at 510-843-6904 today to schedule the plumbing services you need! 

    _________________________________ 

    Albert Nahman Plumbing & Heating – https://www.albertnahmanplumbing.com/ | https://www.albertnahmanplumbing.com/alberts-blog/ 

    Berkeley, CA 

    510-843-6904 

    1981 

    _________________________________ 

    https://www.doityourself.com/stry/troubleshooting-common-toilet-flapper-problems 

    https://carefreecomfort.com/blog/troubleshooting-the-flapper-of-a-constantly-running-toilet 

  • 7 Ways to Improve Indoor Air Quality

    If you’re like most people, you spend 90 percent or more of your time indoors. And since indoor air pollution is often two to five times higher than outdoor pollution levels, this lack of fresh air could negatively impact your health. Implement the following seven tips to improve indoor air quality so you can start breathing easier. 

    Replace the HVAC air filter: 

    If you have a furnace and central air conditioninga built-in filter traps particles as the forced-air system operates. Plan to change the filter monthly or according to the manufacturer’s directions. When you do, consider upgrading your filter to one with a higher Minimum Efficiency Reporting Value (MERV) to increase home filtration and improve indoor air quality. 

    Install a UV germicidal lamp: 

    UV light destroys mold, bacteria, viruses, and other microorganisms that circulate through the HVAC system. Remove these microorganisms from the air, and your allergies are bound to improve.  

    Use an air cleaner

    Set up a portable air cleaner in your bedroom while you sleep. Different models work by capturing particles—such as dirt, dust, mold spores, and bacteria—while others also remove odors and vapors from the air. 

    Remove excess moisture: 

    Mold is a significant deterrent to good indoor air quality, so strive to keep standing water and high humidity at bay. You can do this by fixing pipe leaks, drying off the bathroom tiles after you shower, using exhaust fans while cooking and bathing, and running a whole-house dehumidifier. 

    Clean the air ducts: 

    After years of use, your ductwork could be filled with dust, cobwebs, mold, and other irritants. A visual inspection is a good place to start. Then, if you find problems that could be causing increased asthma and allergy symptoms at home, consider having professional duct cleaning performed. Your system will run more efficiently, and you’ll breathe easier knowing the ductwork is free of contaminants. 

    Tackle dust: 

    To cut back on this common allergen, do away with knickknacks, wall-to-wall carpeting, and excessive upholstery. Wash bedding and rugs often, and dust hard surfaces using a damp microfiber cloth. This attracts dust, rather than simply moving it around, and it doesn’t require chemical dusting aids. 

    Open the windows at the right time: 

    Opening the window in a stuffy room provides a breath of fresh air, but it could allow more contaminants to enter if pollen counts are high. In this case, you’re better off running the air conditioner rather than letting these allergens drift inside. Keep an eye on the daily pollen counts from your local weather service, and only open your windows when the numbers are low. 

    Albert Nahman Plumbing & Heating is your local indoor air quality expert. We proudly serve the Berkeley, CA area with high-quality HVAC services that help you breathe easier all year round. To learn more about us, or to schedule indoor air quality services, please contact us at 510-843-6904. 

    _________________________________ 

    Albert Nahman Plumbing & Heating – https://www.albertnahmanplumbing.com/ | https://www.albertnahmanplumbing.com/alberts-blog/ 

    Berkeley, CA 

    510-843-6904 

    _________________________________ 

    https://www.petro.com/resource-center/improve-indoor-air-quality 

    https://www.realsimple.com/home-organizing/cleaning/improve-air-quality-at-home